-
Bolts for motor well
I have a sweetwater 2286fc. How many bolts should there be holding the motor well to the frame, Is the motor well re-enforced at the stern? Thanks
-
Dimensional drawings
One of my seats leaks slightly too, no biggy, the items I don't want to get wet are in a heavy duty poly storage bag. There are after market, lockable, waterproof boxes that can be secured (screwed down) under a seat for your valuables, also, there are lockable glove boxes available that can be installed in the console,…
-
Follow up Question For 1987 SW615. How Do I Get water out of the front of the Pontoon?
Drain Plug on back of Pontoon let no water out. Tilled Boat almost straight up. Water still in front part of Pontoon.
-
bimini frame
Hello i just ordered a bimini frame from my local dealer he was told it would be 3 months, Is this normal wait time for replacement parts? it will be a hot summer without it. Sweetwater 1880 re tuscany series 2007. Thank you.
-
Manuals or literature
Purchase a 280s model 1999. Are there manuals, literature or something that will contain console wiring info ?
-
The rail skin was damaged.
Rail skin was damaged prior to delivery. I suspect it happened during the rolling process. How long will it take to get another one to dealer and what is the replacement service replacement time?
-
What Year is boat?
Just got a Used Model SW615 Sweetwater Executive Cruiser GDY1712MK687 16ftx6ft Do not Know the Year, and What is the H.P. Capacity?
-
Best hoist for 2086 in 18" of water?
I am awaiting a 2013 Sweetwater 2086 (20') Pontoon. In the meantime I am looking for a hoist. I originally wanted one that I can add a canopy on but apparently my lakeshore of 18" is not deep enough for certain ones. I was quoted $2,249 for a Craftlander 3,200 lbs holds up to a 22'. I have a sandybottom on the northside of…
-
Leaking air from pontoon lifters
Is there a way to eliminate the annoying air leaking from the pontoon lifter on my SW 2086? It happens when I first get back to the dock and continues until all the air is out of the lifter. It only happens on the port side. My guest think my boat is sinking. Very embarrassing.
-
question for admin
hi there are a few brass nuts embedded in my lower helm station on my 18ft. Looks like something should attach to it. My dealer has no idea. Am I missing a part? thanks CRF
-
mooring whips
can i rig mooring whips on eyes on the pontoons safe. cleats that came installed if used will cause lines to rub on boat
-
I am in Australia and have a Parti Kraft 240RE and need to find a supplier.
http://www.yournewboat.com/07PartiKraft240RETriToon/index.htm My boat is identical to the one in this link and need to find a replacement double bimini and mooring cover. Can anyone please assist? I am in Australia and not having a lot of luck here.
-
I have a 2011 AP240SL. Any ideas on how to find the "floor switch" wires to connect to?
I have a wired "floor switch" on my panel but can't distinguish which ones they are in the "jumble of wires" underneath. I have installed floor lights and need to hook them up.
-
How do I remove the back cushion from the front curved seat?
I have a Parti Kraft pontoon and I need to remove the back cushion from the front curved seat. I see there are screws that go through the aluminum railing into the back of the cushions. There also appears to be a fastener or special item between the seat section and the back cushion. When I use a mirror I see holes drilled…
-
Model #
Hello, I recently bought a 1994 Godfrey Sweetwater. Now I want to do upgrades such as tops & covers. How do I find out what model # or style of sweetwater I have? example-SW 2080 BF. Please help. Thanks