Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.
Discussion List
Pontoon Chambers
I purchased 6 used Godfrey pontoons from a marina to use on a house boat project. When pressure testing them, air flows between the chambers, all vent holes must be sealed to build pressure in the pontoon. Is this correct? Aren't the chambers supposed to be individual for safety from damage? Thanks!
Lifting using Pontoon Eyes
I have a 2021 Sweetwater 2486 (Tritoon) with a Yamaha 200. I'm building a new dock that's in a shallow cove. The slip will be in about 2ft of water and I'm concerned that I may not have enough clearance for a traditionally lift with a bottom support with bunks. I thought about rigging a lift to attach the lift cables to…
Why does my 2018 sweet water only take so much gasoline and then comes out of the fill neck?
vapor recovery syste
No Fuel
I am fairly certain my anti siphon valve is clogged. I am getting no fuel and my primer bulb will not uncompress when I try and prime it. I have tried blowing air into the line with no luck. Does anyone here have any thoughts on how to repair or do I need to take it in?
We have a 2010 Sweetwater 20' model. We are looking to replace the seating.
We want to replace with Wise Brand Premier seating. Any ideas we need to be thinking about for an older model?
Prop size
I have a godfrey 24 footer. Running a 115 4 stroke yamaha. Anyone running the same setup? Wondering what prop you are running on it. I know what yamaha recommends but want what actual folks are running.
Sweetwater Mooring cover
Does Grefrey sell a mooring cover for a 2012 2086 pontoon? Or will they share where they have their mooring covers made?
Notch in pontoons 2007
About 2 feet from the front of both pontoons I have a notch on the bottom of each pontoon. When I put boat on lift water drains from this notch for 1-2 days depending on how long the boat was in the water. I assume this notch is not a 1 way drain but it is by design and is allowing water to enter the pontoon. Before I seal…
I am looking for the own part number of a Ski tower
Looking for the oem p/n for a 2017 Godfrey 2286 DL (double lounge) if you have a non oem tower recommendation… I am all ears. Thx
Dry weight
Where can I find dry weight on 2012 sweetwater 220sl‽
2022 updates Sweetwater cx
Just picked up a 2022, SW 1886 CX. Ordered as a 2021, covid delayed , delivered as a 2022. Fuel fill is off the back by the engine. The tank clearly visible behind the engine with the fill tube. Filling up at the station was not an issue, filler gun up at head height. Nice to be able to see the fuel in the tank as it is…
Enclosures
http://www.north-american-waterway.com/pontoonboat_half_enclosure.htm http://www.lakesidecanvas.com/gallery/pontoon-enclosures
Alge cleaning
What is the best way to get the alge off the pontoon Can it be done by me or should I have it done What should I use
replacement seats for my 2012 24 foot sweetwater
I am looking to replace the lounge seats in my 2012 24 foot sweetwater 220
Bow radius
I need to replace the seats on my 2006 240 fc. I want to install benches in the front. Does anyone know the radius of the front corners?